These are full-size, 1:1 scale, “functioning” replicas of Dante’s famous twin weapons: Ebony and Ivory, from the “Devil May Cry” video game series.
Based on over-sized Colt 1911 semi-automatics, these replicas draw their inspiration directly from the original concept sketches by acclaimed artist Makoto Tsuchibayashi, with minor tweaks to size and proportions to bring them in line with the later games while still keeping them practical for normal, human-sized hands.
Once properly finished and assembled, these replicas will be “functional” in the following ways:
- Hammer can be cocked
- Slide will travel, and will also cock the Hammer
- Trigger will release the Hammer
- Slide Release will lock the Slide open
- pressing the Magazine Release will release the Magazine
- Bullets are separate and can be loaded into the Magazine
Note that these will be incapable of firing any sort of projectile, and can not be altered or retrofit around airsoft or similar firing weapons.
This is an UNFINISHED kit, straight from the mold. Like all raw kits it will require some trimming, sanding, assembly, and paint before being finished. Actual colors may vary – most parts will be shades of gray.
This is an ADVANCED kit! It is strongly recommended that you have experience working with resin or model kits, as well as some level of technical proficiency working with metal rods, springs, and similar mechanical parts.
Note that images of finished items serve only as examples of what a completed replica can look like.
What You Get:
This listing contains all necessary parts for ONE (1) complete replica of Ebony, and ONE (1) complete replica of Ivory, for a total of TWO (2) replicas.
Ebony and Ivory are mirror images of each other, and most parts are specific to their respective replica.
EACH replica consists of FOURTEEN (14) unique parts, all of which are mirrored between the 2 pistols:
- (2x) Frames
- (1x) Slide
- (1x) Barrel
- (1x) Compensator
- (1x) Compensator Frame
- (1x) Grip
- (1x) Magazine
- (1x) Hammer
- (1x) Safety
- (1x) Slide Release
- (1x) Palm Safety
- (2x) Portrait
There are an additional SEVENTEEN (17) parts that are NOT mirrored, and are the same for both pistols:
- (2x each) Mainspring Housing
- (2x each) Magazine Catch and Plunger
- (2x each) Safety, Hammer, and Sear Pins
- (2x each) Trigger and Trigger Bar (3D printed STEEL construction)
- (4x) Bullet
- (4x) Portrait Cover
- (2x each) assorted other pins and internal parts
Ebony has ONE (1) unique part:
- (1x) Rear Sight.
For a total of FIFTY NINE (59) cast-resin parts, and FOUR (4) printed photo “Portraits.”
All plastic parts are made from durable urethane resin. Additionally, all load-bearing and/or functional parts have been post-treated for extra durability to withstand extreme abuse.
Also included are the following Mechanical Parts, all pre-cut to approximate size:
- (2x) Mainspring
- (2x) Magazine Catch Spring
- (2x) Slide Spring
- (2x) Aluminum Recoil Guide Rod
- (8x) Socket-Head “Compensator” Screw
- (8x) Round-Head “Grip” Screw
- (12x) Aluminum “Frame” Pin
- (6x) Brass “Trigger Connector / Hammer” Pin
- (2x) Aluminum “Trigger” Pin
- (2x) Steel Sear Spring
You will additionally receive THREE (3) PDF files, including:
- (1x) Very Helpful Guide
- (1x) Component Pin Chart
- (1x) 22 Page, Step By Step Assembly Instructions
You will be notified when this item ships, and given tracking info.
This item typically ships in 4-6 weeks. This allows me to work more efficiently, keeping the price lower for you.
If you need this item by a specific date, please contact me regarding that date before placing your order to confirm I can meet your deadline. Keep in mind you will likely need some time to finish the item before it can be used, so choose your desired deadline accordingly.